/

carogna remover is a modern solvent that will soften gelify dried out mastic or other glues allowing to completely remove them from carbon or aluminum rims that will provide the optimal surface for passing to our carogna tubular tape or use fresh mastic on a clean rim features not smelly nor dangerous unlike fast evaporating solvents works great carogna remover thanks to its high viscosity can be spread on the rim gluing surface where mastic is with a brush being red you will clearly see where it is and spread it evenly on the whole glued surface 50ml how to use it carogna remover should be spread on the whole gluing surface using a small brush we recommend to completely cover mastic traces with a thick layer around 1 mm of remover thanks to its high viscosity carogna remover won t drip down but stay where you put it on top of the mastic dissolving it warning 1 immediately clean carogna remover if any excess goes on rim decals as some might be dissolved warning 2 do not apply on the tubular base tape while it could certainly function on the mastic there carogna remover might weaken the adhesion of the base tape to the tubular casing allow carogna remover time to work depending on the mastic type thickness and ageing more time might be need once the old mastic is covered with remover the wheel can be hung somewhere and checked from time to time between 2 to 12 hours trying to scrape the mastic away using a plastic tire lever or an old rag if mastic is still holding strong allow more time when the old mastic is cooked carogna remover will have it softened and turned it into gel it can at this point be removed using a cloth or a plastic tire lever

Marca: Effetto Mariposa

GTIN: 7640164680774

Más información